[img]
can i jack the motor far enough up to get the oil pan out, or do i have to do it like a ford and pull out the engine? pan is rotted out, truck is...
good impact gun tight. realistic figure though is 1/2" studs 110-125 9/16" studs 150-175
my duallie that i put the engine in looking not to shabby now for a $2200 truck [img] kinda scared to hook the goose to it though even though it...
goodyears, firestones, and coopers on my tow rigs.
at 60 tons all your tires under that trailer would be flat, and the axles bent.................
woho, the whole truck is gone!! surprizingly enough that even advertising it for sale with dark photos and the truck hooked up to a wrecker i nthe...
atleast today they do, nothing but working on them from 8 am to 9 pm first this joyfull pile had to come out of its home minu a cam bearing that i...
make an offer. yes it runs, and runs strong.....
the angle iron gives sharp edges for tires to bite. your round tube will be a slipery son of a bitch in the rain for fwd only broken 4x4's and...
gutless wonder truck, thats a 7.3L naturally aspirated non powerstroke... i am near chicago and can sell you a 93 f350 2wd ex cab dually, XLT...
thiiner oil can helpo as its an injector or IPR problem you are most likely have happening. slight hesitation and some blue smoke when it does...
its really rusty, and has no brakes(due to rust im shure it needs lines front to back, and wheel cylinders) the front fuel tank fell out(straps...
7.3L have problems, but so does every engine. none ar emajor $$ problems, 7.3L have tons of fail safes built in, so if most items do fail the...
while intitially starting, or after it fires does it cough and buck?
guess it could be a tow rig for someone. anyone want parts? my $400 school district truck isnt to bad. 94 460 with 25k miles o nthe truck, plow,...
make shure the airbox is not cracked. take off the inlet tube to the turbo(you need regular screwdriver, 10mm socket, ratchet, and a 9/16 socket...
i feel the need to only run 40lbs in my HD bags i nthe back and that makes a world of diverence with my big goose..... 40lbs lifts my truck right...
easy. 2 wire plug above the top left of the crank pulley. one 10m bolt holds it in. a small prybar and screwdriver usually required to pop it...
becuase trucks are made to have weight in the bed................ that then sags the rear.....
Separate names with a comma.
