Ya, it'll probably take me that long to get him to spend any "performance" money on it.
Can the modules & tuners for the 05's be used on the 07's? A co worker just go an 07 3500, and I'm trying to be the bad influence by talking him...
It's on the driver side. Have a helper pump the go pedal with the engine off, then you'll see it right away.
I'll go with RJF. I had a 12 valve that was about 380hp, and the stock tranny lived for 12k miles like that. I only towed a 2000 lb trailer once...
1 click is a quarter turn on the nut, and equals about 100 rpm. You can go up to 4 clicks, after that it may not want to idle below 1000rpm.
The 12's came on the 94-98 12 valve, and most 98.5-02 24 valves. Although, some 24V's had an HY35 with a 9cm housing, which would be a good one...
Welcome Henry, I worked in SLO for a few months last year, too bad I cant afford a house there.
I live about 2 miles from him. You want me to go slap him around a little?
Instead of swapping plates, you can slide yours back a little until you get other mods.
Not to be anal, but....47RH was in the 94 & 95. Then they went to 47RE(mostly just electronics in the valve body) in 96 until 04 or so when the...
If you still have stock fueling, it'll probably not be enough to spool the turbo up. With mods, it'll eventually spoolup, but take a real long...
So, the true HID system actually gets hot enough to melt stuff?
Skip the little 5.9, try for a DT466 from an IH truck.
Are you a spy?
That's funny, that's the same time my 69 Mustang did after I put $3200 worth of 351C in it. That's movin pretty good. You definately need more...
You can use a pan designed for a 727, it's the same pan & most of the internals too. Yours is the A518, which is just a 727 with an overdrive unit...
The first gen 6BT's did have either an 18 or 21cm housing. The 12 didnt come to play until the 94's. The 16 is a great all around size for...
After the pistons & stuff: Turn up the pump a little, and add injectors from Kennedy Diesel. Not that I'm advertising for him, but I think it's...
I'm not brand preferenced, but I like it better than the current line.
They're perdy mayn. how many watts are the bulbs?
Separate names with a comma.
