To add 2 cents: The diff between a 9004 & 9007 is the 9004's have a horizontal filament, and the 9007's are vertical. That's if the bulb is...
I've used blue, ultra blue, black, and ultra copper with good results.
There's nothing wrong with slipping in a Cummins 6BT, but a DT466 is just a whole new animal:pimp: . Sure, the characteristics, power band, and...
Hermiston is where my dad goes hunting. Nice scenery! I lived in Albany for 20 yrs myself. Cant say I grew up there, it hasnt happened yet & I'm...
You got it right, just remove all the springs & the lower seat except the big outside one. You cant get the big spring out thru the top anyway, so...
The Dodge Mega cab is a real crew cab!
I've seen them on ebay, dieselenginemotor.com , and valtruck.com
That's like my unit at FT Bliss, TX. For some strange reason, quite a few of the Hummers had advanced timing and higher than stock fuel rate. Wish...
What's wrong with the tank one? Is it low flow?
It's not very likely it hurt the engine, they hold around 26qts. Usually by the time you shut it off, you'd have 4 or so actual qts that sprayed...
A Detroit found its way into a 56 F100 here: http://home.comcast.net/~boilerbots/
On many valet switches, it'll cut the power to less than stock, unless you have 370's or bigger.
I think Mr. Donnely has access to a pump flow bench. An injection shop can recalibrate the flow of the pump to some big numbers(mega cc's), but...
It also helps to be running a bit more fuel than stock, so you can get to those rpm's. I had a 4k kit on my old Dodge, it really helps an auto. I...
Kooool! Count me in!
If you're looking for almost close, I'd be looking at Diesel Dynamics in Vegas.
You mean you dont trust us to help you spend your money?:D
To gear heads, it's the best music that you dont have to buy!rotfl
So, what do ya think my 91 Geo metro will do. It has straight pipe thoughrotfl :stir:
On this subject, does a 1 Ton have the same front end parts(diff, CV's, etc) as a 3/4 ton in the 89-98's?
Separate names with a comma.
